| Availability: | |
|---|---|
| Quantity: | |
FD-3D1200 3D Scanning Sonar
Technical Specification
1. Purpose of the Equipment
3D1200-H and 3D1200-D panoramic 3D sonars are versatile multibeam scanning
3D imaging sonars featuring multiple functions such as 3D scene scanning, 3D region
scanning, and downward-looking 3D scanning. They can be used to scan the 3D
contours of fixed objects or an entire scene in water, or to perform imaging, collision
avoidance, and other functions. They feature strong functionality, low cost, compact size,
light weight, and low power consumption. Thanks to the sealed oil-filled structure with no
external rotating parts, the risks of sediment blocking the bearings and entanglement by
seaweed or fishing lines are eliminated.
The 3D1200-H and 3D1200-D operate using a multibeam scanning method. A
motor drives the sonar transducer to rotate, performing imaging of one profile and
target position estimation at each angle. As the motor rotates, the echoes at each
position are used to build the intensity map and point cloud of the entire scene. The
field of view of the sonar reaches 360 *120 degrees, achieving full coverage of the scene.
The scanning range, speed, and resolution can all be configured via software.
Compared with our company's 3D1000 single-beam 3D scanning sonar, this
sonar adopts the principle of multibeam profiling with single-axis mechanical scanning,
which greatly improves the scanning speed: the time to scan an entire scene is
shortened from tens of minutes to ten-odd to tens of seconds. This not only improves
efficiency, but also makes it convenient for underwater vehicles such as ROVs to
perform surveying while hovering. Compared with planar-array multibeam 3D sonars,
this model offers a much wider field of view, better point cloud quality, and a much
lower price.
The difference between the 3D1200-H and 3D1200-D sonars lies in the scanning
sector field of view: the 3D1200-H has a scanning sector field of view of ±60° (0° is the
direction perpendicular to the sonar axis), while the 3D1200-D has a sector field of view
of +90°/-10°. Therefore, the 3D1200-H is suitable for mapping and perception of
surrounding objects by underwater vehicles such as ROVs and UUVs, while the 3D1200-
D is more suitable for deployment from surface vehicles such as USVs by lifting,
achieving dead-angle-free scanning of the entire water column.
The 3D1200-H and 3D1200-D sonars operate at a working frequency of 1.2MHz,
with 400kHz, 700kHz, or other frequencies available upon order. The working depth is
300m. For other frequencies or greater depths, please contact our company.
2. Technical Specifications
2.1. Sonar Technical Specifications
(1)Center frequencies: 400kHz, 700kHz, and 1.2MHz available upon order; other frequencies
can be customized;
(2)For details on the detection range, central beam width, and opening angle, please refer to
the table below (maximum detection range applies to strong reflective targets such as
rocks or coastlines; clear water, flat sandy seabed, good or moderate hydrological
conditions, and speed below 6 knots.)
Model | 0400 | 0700 | 1200★ |
Frequency | 400kHz | 700kHz | 1.2MHz |
Circumferential beam width | 3° | 1.7° | 1° |
Axial beam width | 2.4° | 1.4° | 0.8° |
Circumferential field of view | 10~360° | ||
Axial field of view (3D1200-H) | -60°~+60° | ||
Axial field of view (3D1200-D) | -10°~+90° | ||
Maximum detection range | 150m | 90m | 50m |
pour:
1.
Refers to the horizontal -3dB energy distribution angle of the image of a point target
along the horizontal and vertical directions of the sonar; an error of +10%/-30% is
allowed;
2.
Refers to the field of view of the sonar. 0° is defined as the plane perpendicular to
the sonar axis. Large targets within this angle can be observed by the sonar, but the
resolution, clarity, and detection range at the edges may be lower than those at the
center;
3.
Detection range for high-reflectivity objects such as embankments and bridge piers
in seawater under good hydrological conditions; the maximum detection range in fresh
water under good hydrological conditions is about 1~1.5 times that in seawater;
Range resolution: range-dependent, minimum 2.5mm;
Number of beams per profile: 512;
Range: 1~80m, continuously adjustable;
Transmission mode: CW or CHIRP, with automatic or manual selection;
Maximum working depth: 300m or 1.5km; can be customized for deeper applications;
Working blind range: ≤0.2m;
Scan resolution: 0.1°~10°;
θ-axis scanning range: 10~360°, see the figure below;
φ-axis field of view: -60°~+60° (3D1200-H), -10°~+90° (3D1200-D), see the figure below;
2.2. Electrical Interfaces
(1) Input voltage: 12 to 36VDC;
(2) Power consumption: The average power is approximately 3W, with peak power below 20W.
(3)Communication interface:RS-485 half-duplex isolation (460800 bps) and RS-232 full-duplex isolation(115200bps), or 100Mbps Ethernet, as specified at the time of order.
(4)External connectors: 1 waterproof connector for signal and power transmission;
Scanning speed: range-dependent, up to 40 lines/s;
Scanning mode: panoramic or sector scan;
2.3. Electrical Interfaces
Input voltage: 18~50VDC;
Power consumption: the average power is approximately 15W, with peak power below
40W.
Communication interface: 100Mbps Ethernet;
External connectors: 1 waterproof connector for signal and power transmission;
3. Mechanical dimensions of appearance
3D1200 -H
3D1200-D